152 not for new design use phe840m phe843 emi suppressor, class x2, metallized polypropylene 0.01 ? 6.8 f, 275/280 vac, +105 c for replacement, see phe840m typical applications construction technical data for worldwide use as electromagnetic interference suppressor in all x2 and across- the-line applications. metallized polypropylene winding, encapsulated in self-extinguishing material meeting the requirements of ul 94 v 0. environmental test data endurance iec 60384 14 1.25 x u r vac 50 hz, once every hour increased to 1000 vac for 0.1 s, 1000 h at upper rated temperature vibration iec 60068 2 6 3 directions at 2 hours each, no visible damage test fc 10 55 hz at 0.75 mm or 98 m/s 2 no open or short circuit bump iec 60068 2 29 1000 bumps at no visible damage test eb 390 m/s 2 no open or short circuit change of temperature iec 60068 2 14 upper and lower rated no visible damage test na temperature 5 cycles active flammability en 132400 passive flammability iec 60384-14 (1993) enclosure material of en 132400 ul94v 0 flammability class ul1414 humidity iec 60068-2-3 +40 c and 56 days test ca 90 95% r.h. p d std l max l b 10.0 0.4 0.6 17 30 0.4 15.0 0.4 0.8 17 30 0.4 22.5 0.4 0.8 6 30 0.4 27.5 0.4 0.8 6 30 0.4 37.5 0.5 1.0 6 30 0.7 tolerance in lead length < 30 mm mm 30 mm mm +0 ? 1 +5 ? 0 l h b p l ? d 0.5 b rated voltage 275 vac 50/60 hz (enec) 280 vac 50/60 hz (ul, csa) capacitance range 0.01 6.8 f capacitance tolerance 20% standard, 10% option temperature range 40 to +105 c climatic category 40/105/56/b approvals s, ul, csa dissipation factor tan maximum values at +23 c c 0.1 f 0.1f < c 1 f c > 1 f 1 khz 0.1% 0.1% 0.1% 10 khz 0.2% 0.4% 0.8% 100 khz 0.6% test voltage between the 100% screening factory test is carried out at terminals 2200 vdc. the voltage level is selected to meet the requirements in applicable equipment standards. all electrical characteristics are checked after the test. resonance frequency tabulated self-resonance frequencies f 0 refer to 5 mm lead length. insulation resistance c 0.33 f: 30 000 m ? c > 0.33 f: 10 000 s in dc applications recommended voltage: 630 vdc
153 not for new design use phe840m phe843 article table lead spacing 10 mm 0.068 5.0 11.0 13.0 10.0 800 700 1.0 7.5 100 ?? phe843ma5680mr17 0.10 6.0 12.0 13.0 10.0 600 500 1.2 6.0 100 ?? phe843ma6100mr17 lead spacing 15 mm 0.15 7.5 14.5 18.0 15.0 400 400 2.2 2.8 100 ?? phe843mb6150mr17 0.22 8.0 15.0 18.0 15.0 400 400 2.9 2.5 100 ?? phe843mb6220mr17 0.33 9.5 17.5 18.0 15.0 300 350 3.5 2.0 100 ?? phe843mb6330mr17 lead spacing 22.5 mm 0.47 9.0 18.5 26.0 22.5 168 5.0 1.5 100 ?? phe843md6470mr06l2 0.68 10.5 19.0 26.0 22.5 264 6.6 1.2 100 ?? phe843md6680mr06l2 1.0 13.5 23.0 26.0 22.5 209 10.0 1.0 100 ?? phe843md7100mr06l2 lead spacing 27.5 mm 1.5 14.5 24.5 31.5 27.5 153 14.5 0.87 100 ?? phe843mf7150mr06l2 2.2 17.5 28.0 31.5 27.5 126 17.0 0.78 100 ?? phe843mf7220mr06l2 3.3 21.0 30.0 31.5 27.5 108 22.6 0.66 100 ?? phe843mf7330mr06l2 lead spacing 37.5 mm 4.7 19.0 36.0 41.0 37.5 91 28.5 0.44 100 ?? PHE843MR7470MR06L2 6.8 21.0 38.0 41.0 37.5 84 34.4 0.39 100 ?? phe843mr7680mr06l2 quantity per package capaci- max dimensions reel max approvals tance in mm bulk tray t aped weight f 0 du/dt article code f b h l p pcs pcs pcs g mhz v/s s ul csa approvals/reference documents certification body specification approval reference s en 132400 0045274/01 ul ul 1283 (u r = 275 vac) e100117 ul 1414 (u r = 250 vac) e73869 cul recognition c 22.2 no. 8 (u r = 275 vac) e100117 (csa) c 22.2 no. 1 (u r = 250 vac) e73869 ordering information packing the box dimensions for bulk packaging are 245 x 145 x 80 mm. quantity/package as per article table. reels with taped capacitors are packed 10 in a box with dimension 370 x 370 x 560 mm. quantity/reel according to article table. the standard quantity/reel is for 360 mm reel. if 500 mm reel is required, it must be specified when ordering and the quantity is 2 x the given quantity. marking rifa rifa article code rated capacitance capacitance tolerance code rated voltage x2 approval marks manufacturing date code iec climatic category passive flammability class the article code for the standard part is given in the article table. for other options, see page 21.
|
